Centering Automatic Calibration

Perform centering calibration.
Select the [Automatic Calibration] tab on the screen below.

KEY POINTS

---

• The [Automatic Calibration] tab will not appear if the platform type is set to “Slots”, “Holes”, or “Pockets”. Refer to the following section for further details.
  Vibration
• The [Automatic Calibration] tab is not displayed for the IF-80.

Description of display items

Items	Description
Short axis centering time	The duration of the short axis centering is displayed. Unit: ms
Long axis centering time	The duration of the long axis centering is displayed. Unit: ms

Calibration

1. Place the number of parts displayed in the instruction.
2. Click the [Run] button.
   Feeder starts vibrating and the optimal centering times will be determined.
3. Click the [Apply] button The result saved.