Centering Test & Adjust

Test and adjust the centering parameters.
Select the [Test & Adjust] tab on the screen below.

Description of display items

Items	Description
Centering to test	Select the type of centering behavior you want to test. Long Axis + Short Axis Short Axis + Long Axis Long axis Short Axis Center By Shift:
Long axis parameters Short axis parameters	Choose which centering axis you want to adjust. It is not displayed when "Center By Shift" is selected.
Amplitude	Set the strength of the amplitude of the vibration. Unit: % It is not displayed when “Center By Shift” is selected.
Duration	Set the duration of the vibration. Unit: ms It is not displayed when "Center By Shift" is selected.
Frequency	Set the frequency of the vibration. Unit: Hz It is not displayed when "Center By Shift" is selected.

Guidelines for adjustment
Adjust the amplitude and frequency so that the parts concentrate in the specified direction as quickly as possible. Set the vibration time to the time it takes centering to complete.

Test

1. Put in an appropriate number of parts (e.g., optimal number of input parts).
2. Click [Run] button.
3. Check the operation. Adjust the parameters as needed and click the [Run] button again.
   Refer to the following for further details.
   How To Adjust Feeder Parameters